Authorized maintenance




Maintain and repair your watch
当前位置:北京雷达维修 > 腕表资讯 >

How to polish radar Watch

作者:雷达维修服务中心   日期:2021.03.05

       How to polish radar watch? Next, the maintenance master of Beijing radar maintenance service center provides you with the following knowledge points. When wearing a watch, it is usually the watch that is exposed, so it is inevitable that it will be scratched. Over time, it will not only affect the appearance, but also the viewing time. The first thing I want to think about is polishing the watch. So how to polish the watch when the watch has scratches? Let's teach you how to polish the radar watch by Beijing radar after-sales service center.

       How to polish a radar watch.

       1. First of all, we need to prepare tools for polishing: purple wax, white wax, green wax, hemp wheel, nylon wheel, cloth wheel, sanding paper and polishing machine. We also need to prepare 800, 1000, 1500, 2000, 5000 grit sanding paper, wire drawing block, metal polishing section, and rubber of various sizes

       2. First, use 800 strength abrasive paper to wrap the rubber and rub the deep scratches. Then, with the friction of 1000, 1500 and 2000 particle size, select 5000 particle size abrasive paper for initial polishing. Then polish it again with polishing cloth or polishing oil. Finally, use wire drawing block to polish the wire drawing effect.

How to polish radar Watch

       3. You can also use a cloth wheel to pick up wax stone, and then repeat polishing on the surface

       At this time, the polishing machine should be adjusted to the high-speed mode of 20000 rpm, and the polishing machine should be gently polished until the surface refracts cold light, so that you can see your own appearance from the surface, that is, the degree of mirror. In this process, special attention should be paid to the intermittent dipping of wax, so as to ensure the brightening effect of the surface. Similarly, care is indispensable.

       4. Use gasoline to wipe the watch that has just been polished. This is to thoroughly remove the residual stains and wax that may have just adhered to the surface, and make the watch look brighter.

       How to polish radar watch? The above is the whole content of how to polish the radar watch. It is recommended that you give some complicated operations to the technical personnel of the regular Beijing radar maintenance center, so as to avoid the loss caused by improper operation. If you have any need for your watch, you are welcome to consult our Beijing radar maintenance center, there will be professional technicians to serve you wholeheartedly.

本文链接: /rado_information/463.html

版权所有:北京雷达维修服务中心 Copyright © 2018-2032 | XML