What's the matter with Rado's watch? Beijing Rado maintenance service center provides free tips for major watch users at any time. A watch is a precision instrument used to indicate time. The principle of a watch is to use a vibration system with constant period and continuous vibration as the standard. However, the system will also fail. What to do when the Rado watch stops? Let's take you to Beijing Rado after-sales service center to find a way!
Rado watch stopped: cause analysis
Hand on chain and automatic on Chain Watch. Manual watch on the chain is powered by hand, if the watch suddenly stopped, you have to consider the lack of power.
Rado's power is low. Stop: solution
The watch should be wound at the same time every day as far as possible, so that the watch can operate with enough energy in the next 24 hours. The principle of Automatic Chain Watch is to rely on the function of the automatic winding mechanism which can tighten the spring when the watch rotates in any direction. Generally, a fully automatic watch should be worn on the hand for more than 8 hours every day to make up for the amount of winding, but it is not absolute. So if you don't wear it for a long time, or if you don't exercise enough after wearing it, it will also cause the mechanical watch not to go. In this case, it can be solved by manual winding. It is worth noting that for an automatic winding watch that has not been worn for more than 40 hours, the crown should be rotated 20 turns to start the drive system of the movement again when it is worn again.
Rado watch stopped by magnetism: solution
The watch is magnetized, which causes the parts in the watch to be magnetized. Just go to the regular Beijing Rado after-sales service center to demagnetize the watch. The battery in the watch is dead. If this happens, don't repair it. Just replace the watch with a new battery. Let the professional technician use the watch fault instrument detector to see where your circuit board is broken, and then let the watch repairer repair it for you.
What's the matter with Rado's watch? There are many reasons for the watch to stop. If it is not maintained for a long time and the grease is dry, it will also cause the watch to stop. If the Rado watch is hit by a fall, the movement parts will be damaged, and the watch will also stop. So remind watch friends, if your love watch appears stop and go phenomenon, welcome to consult Beijing Rado maintenance center, there will be professional technicians to provide you with the best quality service!